 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C1310 Typical Applications Base Stations Test Equipment Synthesizers PXO Features Surface Mount Package Reflow Process Compatible AT-Cut Crystal SONET Minimum Clock Specification SPO50, 9140 Previous Vectron Model Numbers Frequency range Standard frequencies Frequency stabilities1 [Standard] Parameter vs. operating temperature range (Referenced to +25C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year vs. aging / year (followingYears) Min -10.0 Min -5.0 -1.0 -1.0 -3.0 -1.0 Typ Typ 8 MHz - 700 MHz 10; 24.705; 30.720; 32.768; 50; 68.768 MHz; 77.76 MHz; 155.52; 622,08 MHz Max. +10.0 Max. +5.0 +1.0 +1.0 +3.0 +1.0 Units ppm Units ppm ppm ppm ppm ppm Operating temp range -20 ... +70C Ordering Code D105 5 Condition VS 5% Load 5% Frequency stabilities1 [meets SONET Minimum Clock Specification - Option] Parameter vs. operating temperature range Parameter overall tolerance Min Min -20.0 Typ Typ Max. Max. +20.0 Units Units ppm Operating temp range Ordering Code -20 ... +70C D205 Condition ( 15 Years aging, temp, initial, supply, load ) 5 Supply voltage Parameter Supply voltage (Vs) Current consumption Current consumption Supply voltage (Vs) Current consumption Current consumption Current consumption 3.135 3.3 Min 4.75 Typ 5.0 Max. 5.25 40 90 3.465 30 80 25 Units VDC mA mA VDC mA mA mA Condition Ordering Code SV050 5 @ HCMOS < 155 MHz @ PECL < 155 MHz SV033 @ LVHCMOS< 155 MHz @ LVPECL< 155 MHz @ LVDS< 155 MHz Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-09 * page 1 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C1310 PXO RF output Parameter Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle 40 PECL 50 45 LVDS 100 40 1 60 1 55 Min Typ HCMOS 15.0 5 60 Max. Units pF ns % ns % ns % @ 15 pF 10 to 90 % @ Vs/2 RFP Vs - 2V 20 to 80 % RFL 10 to 90 % Condition Ordering Code RFH 5 Additional parameters Parameter Phase Noise Min Typ -75 -110 -135 -142 -142 Jitter Weight Processing & Packing 1 2 handling&processing note Max. Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS g Condition 10 Hz @155 MHz 100 Hz 1 kHz 10 kHz 100 kHz @ 10 kHz to 20 MHz PECL 3,3V Enclosures Type G223A for HCMOS and LVHCMOS Version Package Codes: Code A1 Height "H" 5,9 Pin Length "L" NA Type G218B for PECL; LVPECL and LVDS Version Code B1 Height "H" 5,9 Pin Length "L" NA Dimensions: mm Dimensions: mm v.2005-11-09 * page 2 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax C1310 PXO 1 2 3 4 Pin Connections NC / Enable (optional) Ground (Case) RF Output Supply Voltage Input (Vs) 1 2 3 4 5 6 Pin Connections N/C N/C / Enable (optional) Ground (Case) RF Output Complementary RF Output Supply Voltage Input (Vs) Outline Drawing: G218B Outline Drawing: G223B Marking C1310A1-xxxx frequency * VI AYYWW Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min -30 -40 Typ Max. 7 +80 +90 Units V C C Condition Typical Phase Noise and Jitter (52 MHz; HCMOS output) (155,52 MHz; PECL output) Frequency range [Hz] 100Hz to 1.5MHz 50kHZ to 1.5MHz 12kHz to 20MHz S(f) [dB] -77dB -91dB -80dB Jitter [ps rms] 0.432ps 0.086ps 0.306ps Frequency range [Hz] 500Hz to 1.5MHz 65kHZ to 1.5MHz 12kHz to 20MHz S(f) [dB] -73.96dB -75.87dB -65.34dB Jitter [ps rms] 0.205ps 0.165ps 0.553ps Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-09 * page 3 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C1310 PXO Typical Phase Noise and Jitter (122,88MHz; LVDS output) (622,08MHz; PECL output) Frequency range [Hz] 100Hz to 1.5MHz 50kHZ to 1.5MHz 12kHz to 20MHz S(f) [dB] -75dB -84dB -75dB Jitter [ps rms] 0.230ps 0.082ps 0.230ps Frequency range [Hz] 1kHz to 5MHz 250kHZ to 5MHz 12kHz to 20MHz S(f) [dB] -67.09dB -68.18dB -61.95dB Jitter [ps rms] 0.113ps 0.100ps 0.204ps Typical frequency stability vs temp 10 5 0 df / ppm -5 -10 -15 -45 -25 -5 15 35 55 75 Temp. / C Standard Shipping Method A X B P K *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] G218B / G223B 24 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Quantity per meter 83,3 Quantity per reel 850 Dimension P 12 v.2005-11-09 * page 4 of 5 Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C1310 Recommended Reflow Profile PXO Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) Tsmax to TL - Ramp-up Rate Time maintainted above - Temperature (TL) - Time (tL) Peak Temperature (Tp) Pb-Free Assembly /Sn-Pb Assembly 3C/second max. 150c 200c 60-180 seconds 3C/second max. 217C 60-150 seconds max 260C Profile Feature Time 25C to Peak Temperature Time maintainted above - Temperature (TL) - Time (tL) Pb-Free Assembly /Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds Time within 5C of actual Peak Temperature (tp) Ramp-down Rate 20-40 seconds 6C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model C1310 Example: C1310 D105 SV050 RFH A1 Stability Code Supply Voltage Code RF Output Code Package Code Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model C1310 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number] Typical P/N = C1310A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2005-11-09 * page 5 of 5 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax |
Price & Availability of C1310A1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |